fix(autoconfigure): apply the actions properly in the root

hack/dev/boot.sh

@@ -65,13 +65,8 @@ set -- "${@}" \
 	-drive "if=pflash,file=${FINAL_DIR}/ovmf-boot.fd,format=raw,readonly=on" \
 	-device nvme,drive=disk1,serial=cafebabe
 
-if [ "${DISK_BOOT}" = "1" ]; then
 set -- "${@}" \
 	-drive "if=none,file=${FINAL_DIR}/sprout.img,format=raw,id=disk1,readonly=on"
-else
-	set -- "${@}" \
-		-drive "if=none,file=fat:rw:${FINAL_DIR}/efi,format=raw,id=disk1"
-fi
 
 set -- "${@}" -name "sprout ${TARGET_ARCH}"
 

hack/dev/boot/Dockerfile

@@ -13,6 +13,7 @@ COPY xen.efi /work/XEN.EFI
 COPY xen.cfg /work/XEN.CFG
 COPY initramfs /work/INITRAMFS
 COPY edera-splash.png /work/EDERA-SPLASH.PNG
+COPY bls.conf /work/BLS.CONF
 RUN truncate -s128MiB sprout.img && \
     parted --script sprout.img mklabel gpt > /dev/null 2>&1 && \
     parted --script sprout.img mkpart primary fat32 1MiB 100% > /dev/null 2>&1 && \
@@ -20,6 +21,8 @@ RUN truncate -s128MiB sprout.img && \
     mkfs.vfat -F32 -n EFI sprout.img && \
     mmd -i sprout.img ::/EFI && \
     mmd -i sprout.img ::/EFI/BOOT && \
+    mmd -i sprout.img ::/LOADER && \
+    mmd -i sprout.img ::/LOADER/ENTRIES && \
     mcopy -i sprout.img ${EFI_NAME}.EFI ::/EFI/BOOT/ && \
     mcopy -i sprout.img KERNEL.EFI ::/EFI/BOOT/ && \
     mcopy -i sprout.img SHELL.EFI ::/EFI/BOOT/ && \
@@ -28,6 +31,7 @@ RUN truncate -s128MiB sprout.img && \
     mcopy -i sprout.img SPROUT.TOML ::/ && \
     mcopy -i sprout.img EDERA-SPLASH.PNG ::/ && \
     mcopy -i sprout.img INITRAMFS ::/ && \
+    mcopy -i sprout.img BLS.CONF ::/LOADER/ENTRIES/ && \
     mv sprout.img /sprout.img
 
 FROM scratch AS final

hack/dev/build.sh

@@ -108,6 +108,7 @@ if [ "${SKIP_SPROUT_BUILD}" != "1" ]; then
 	cp "hack/dev/configs/${SPROUT_CONFIG_NAME}.sprout.toml" "${FINAL_DIR}/sprout.toml"
 	cp "hack/dev/configs/xen.cfg" "${FINAL_DIR}/xen.cfg"
 	cp "hack/dev/assets/edera-splash.png" "${FINAL_DIR}/edera-splash.png"
+	cp "hack/dev/configs/bls.conf" "${FINAL_DIR}/bls.conf"
 
 	mkdir -p "${FINAL_DIR}/efi/EFI/BOOT"
 	cp "${FINAL_DIR}/sprout.efi" "${FINAL_DIR}/efi/EFI/BOOT/${EFI_NAME}.EFI"

hack/dev/configs/autoconfigure.sprout.toml

@@ -0,0 +1,4 @@
+version = 1
+
+[defaults]
+autoconfigure = true

hack/dev/configs/bls.conf

@@ -0,0 +1,4 @@
+title Boot Linux
+linux /efi/boot/kernel.efi
+options console=hvc0
+initrd /initramfs

src/actions.rs

@@ -19,7 +19,7 @@ pub mod splash;
 /// that you can specify via other concepts.
 ///
 /// Actions are the main work that Sprout gets done, like booting Linux.
-#[derive(Serialize, Deserialize, Default, Clone)]
+#[derive(Serialize, Deserialize, Debug, Default, Clone)]
 pub struct ActionDeclaration {
     /// Chainload to another EFI application.
     /// This allows you to load any EFI application, either to boot an operating system

src/actions/chainload.rs

@@ -10,7 +10,7 @@ use uefi::CString16;
 use uefi::proto::loaded_image::LoadedImage;
 
 /// The configuration of the chainload action.
-#[derive(Serialize, Deserialize, Default, Clone)]
+#[derive(Serialize, Deserialize, Debug, Default, Clone)]
 pub struct ChainloadConfiguration {
     /// The path to the image to chainload.
     /// This can be a Linux EFI stub (vmlinuz usually) or a standard EFI executable.
@@ -99,10 +99,6 @@ pub fn chainload(context: Rc<SproutContext>, configuration: &ChainloadConfigurat
         initrd_handle = Some(handle);
     }
 
-    // Retrieve the base and size of the loaded image to display.
-    let (base, size) = loaded_image_protocol.info();
-    info!("loaded image: base={:#x} size={:#x}", base.addr(), size);
-
     // Start the loaded image.
     // This call might return, or it may pass full control to another image that will never return.
     // Capture the result to ensure we can return an error if the image fails to start, but only

src/actions/edera.rs

@@ -22,7 +22,7 @@ use crate::{
 /// The configuration of the edera action which boots the Edera hypervisor.
 /// Edera is based on Xen but modified significantly with a Rust stack.
 /// Sprout is a component of the Edera stack and provides the boot functionality of Xen.
-#[derive(Serialize, Deserialize, Default, Clone)]
+#[derive(Serialize, Deserialize, Debug, Default, Clone)]
 pub struct EderaConfiguration {
     /// The path to the Xen hypervisor EFI image.
     pub xen: String,

src/actions/print.rs

@@ -5,7 +5,7 @@ use serde::{Deserialize, Serialize};
 use std::rc::Rc;
 
 /// The configuration of the print action.
-#[derive(Serialize, Deserialize, Default, Clone)]
+#[derive(Serialize, Deserialize, Debug, Default, Clone)]
 pub struct PrintConfiguration {
     /// The text to print to the console.
     #[serde(default)]

src/actions/splash.rs

@@ -15,7 +15,7 @@ use uefi::proto::console::gop::GraphicsOutput;
 const DEFAULT_SPLASH_TIME: u32 = 0;
 
 /// The configuration of the splash action.
-#[derive(Serialize, Deserialize, Default, Clone)]
+#[derive(Serialize, Deserialize, Debug, Default, Clone)]
 pub struct SplashConfiguration {
     /// The path to the image to display.
     /// Currently, only PNG images are supported.

src/autoconfigure.rs

@@ -27,24 +27,30 @@ fn scan_for_bls(
     let bls_entries_path = Path::new(cstr16!("\\loader\\entries"));
 
     // Convert the device path root to a string we can use in the configuration.
-    let root = root
+    let mut root = root
         .to_string(DisplayOnly(false), AllowShortcuts(false))
         .context("unable to convert device root to string")?
         .to_string();
+    // Add a trailing slash to the root to ensure the path is valid.
+    root.push('/');
 
     // Whether we have a loader.conf file.
     let has_loader_conf = filesystem
         .try_exists(bls_loader_conf_path)
-        .context("unable to check for BLS entries directory")?;
+        .context("unable to check for BLS loader.conf file")?;
 
     // Whether we have an entries directory.
+    // We actually iterate the entries to see if there are any.
     let has_entries_dir = filesystem
-        .try_exists(bls_entries_path)
+        .read_dir(bls_entries_path)
-        .context("unable to check for BLS loader.conf file")?;
+        .ok()
+        .and_then(|mut iterator| iterator.next())
+        .map(|entry| entry.is_ok())
+        .unwrap_or(false);
 
     // Detect if a BLS supported configuration is on this filesystem.
     // We check both loader.conf and entries directory as only one of them is required.
-    if !has_loader_conf && !has_entries_dir {
+    if !(has_loader_conf || has_entries_dir) {
         return Ok(false);
     }
 
@@ -55,7 +61,7 @@ fn scan_for_bls(
             actions: vec![BLS_CHAINLOAD_ACTION.to_string()],
             ..Default::default()
         },
-        path: format!("{}\\loader", root,),
+        path: format!("{}\\loader", root),
     };
 
     // Generate a unique name for the BLS generator and insert the generator into the configuration.
@@ -79,7 +85,7 @@ fn add_bls_actions(config: &mut RootConfiguration) -> Result<()> {
     let chainload = ChainloadConfiguration {
         path: "$chainload".to_string(),
         options: vec!["$options".to_string()],
-        linux_initrd: Some("initrd".to_string()),
+        linux_initrd: Some("$initrd".to_string()),
     };
 
     // Insert the chainload action into the configuration.
@@ -124,8 +130,9 @@ pub fn autoconfigure(config: &mut RootConfiguration) -> Result<()> {
         // Scan the filesystem for BLS supported configurations.
         // If we find any, we will add a BLS generator to the configuration, and then
         // at the end we will add the BLS actions to the configuration.
-        has_any_bls = has_any_bls
+        let bls_found =
-            || scan_for_bls(&mut filesystem, &root, config).context("unable to scan filesystem")?;
+            scan_for_bls(&mut filesystem, &root, config).context("unable to scan filesystem")?;
+        has_any_bls = has_any_bls || bls_found;
     }
 
     // If we had any BLS-supported filesystems, add the BLS actions to the configuration.

src/config.rs

@@ -18,7 +18,7 @@ pub const LATEST_VERSION: u32 = 1;
 pub const DEFAULT_MENU_TIMEOUT_SECONDS: u64 = 10;
 
 /// The Sprout configuration format.
-#[derive(Serialize, Deserialize, Default, Clone)]
+#[derive(Serialize, Deserialize, Debug, Default, Clone)]
 pub struct RootConfiguration {
     /// The version of the configuration. This should always be declared
     /// and be the latest version that is supported. If not specified, it is assumed
@@ -66,7 +66,7 @@ pub struct RootConfiguration {
 }
 
 /// Default configuration for Sprout, used when the corresponding options are not specified.
-#[derive(Serialize, Deserialize, Default, Clone)]
+#[derive(Serialize, Deserialize, Debug, Default, Clone)]
 pub struct DefaultsConfiguration {
     /// The entry to boot without showing the boot menu.
     /// If not specified, a boot menu is shown.

src/context.rs

@@ -83,6 +83,11 @@ impl SproutContext {
         self.root.as_ref()
     }
 
+    /// Access the root context to modify it, if possible.
+    pub fn root_mut(&mut self) -> Option<&mut RootContext> {
+        Rc::get_mut(&mut self.root)
+    }
+
     /// Retrieve the value specified by `key` from this context or its parents.
     /// Returns `None` if the value is not found.
     pub fn get(&self, key: impl AsRef<str>) -> Option<&String> {
@@ -235,4 +240,10 @@ impl SproutContext {
     pub fn stamp(&self, text: impl AsRef<str>) -> String {
         Self::stamp_values(&self.all_values(), text.as_ref()).1
     }
+
+    /// Unloads a [SproutContext] back into an owned context. This
+    /// may not succeed if something else is holding onto the value.
+    pub fn unload(self: Rc<SproutContext>) -> Option<SproutContext> {
+        Rc::into_inner(self)
+    }
 }

src/drivers.rs

@@ -12,7 +12,7 @@ use uefi::proto::device_path::LoadedImageDevicePath;
 /// Drivers allow extending the functionality of Sprout.
 /// Drivers are loaded at runtime and can provide extra functionality like filesystem support.
 /// Drivers are loaded by their name, which is used to reference them in other concepts.
-#[derive(Serialize, Deserialize, Default, Clone)]
+#[derive(Serialize, Deserialize, Debug, Default, Clone)]
 pub struct DriverDeclaration {
     /// The filesystem path to the driver.
     /// This file should be an EFI executable that can be located and executed.

src/entries.rs

@@ -7,7 +7,7 @@ use std::rc::Rc;
 ///
 /// Entries are the user-facing concept of Sprout, making it possible
 /// to run a set of actions with a specific context.
-#[derive(Serialize, Deserialize, Default, Clone)]
+#[derive(Serialize, Deserialize, Debug, Default, Clone)]
 pub struct EntryDeclaration {
     /// The title of the entry which will be display in the boot menu.
     /// This is the pre-stamped value.

src/extractors.rs

@@ -10,7 +10,7 @@ pub mod filesystem_device_match;
 /// Declares an extractor configuration.
 /// Extractors allow calculating values at runtime
 /// using built-in sprout modules.
-#[derive(Serialize, Deserialize, Default, Clone)]
+#[derive(Serialize, Deserialize, Debug, Default, Clone)]
 pub struct ExtractorDeclaration {
     /// The filesystem device match extractor.
     /// This extractor finds a filesystem using some search criteria and returns

src/extractors/filesystem_device_match.rs

@@ -20,7 +20,7 @@ use uefi_raw::Status;
 ///
 /// This function only requires one of the criteria to match.
 /// The fallback value can be used to provide a value if none is found.
-#[derive(Serialize, Deserialize, Default, Clone)]
+#[derive(Serialize, Deserialize, Debug, Default, Clone)]
 pub struct FilesystemDeviceMatchExtractor {
     /// Matches a filesystem that has the specified label.
     #[serde(default, rename = "has-label")]

src/generators.rs

@@ -12,7 +12,7 @@ pub mod matrix;
 
 /// Declares a generator configuration.
 /// Generators allow generating entries at runtime based on a set of data.
-#[derive(Serialize, Deserialize, Default, Clone)]
+#[derive(Serialize, Deserialize, Debug, Default, Clone)]
 pub struct GeneratorDeclaration {
     /// Matrix generator configuration.
     /// Matrix allows you to specify multiple value-key values as arrays.

src/generators/bls.rs

@@ -20,7 +20,7 @@ const BLS_TEMPLATE_PATH: &str = "\\loader";
 /// The configuration of the BLS generator.
 /// The BLS uses the Bootloader Specification to produce
 /// entries from an input template.
-#[derive(Serialize, Deserialize, Default, Clone)]
+#[derive(Serialize, Deserialize, Debug, Default, Clone)]
 pub struct BlsConfiguration {
     /// The entry to use for as a template.
     pub entry: EntryDeclaration,
@@ -86,7 +86,7 @@ pub fn generate(context: Rc<SproutContext>, bls: &BlsConfiguration) -> Result<Ve
         let name = entry.file_name().to_string();
 
         // Ignore files that are not .conf files.
-        if !name.ends_with(".conf") {
+        if !name.to_lowercase().ends_with(".conf") {
             continue;
         }
 

src/generators/matrix.rs

@@ -8,7 +8,7 @@ use std::rc::Rc;
 /// Matrix generator configuration.
 /// The matrix generator produces multiple entries based
 /// on input values multiplicatively.
-#[derive(Serialize, Deserialize, Default, Clone)]
+#[derive(Serialize, Deserialize, Debug, Default, Clone)]
 pub struct MatrixConfiguration {
     /// The template entry to use for each generated entry.
     #[serde(default)]

src/main.rs

@@ -7,7 +7,7 @@ use crate::entries::BootableEntry;
 use crate::options::SproutOptions;
 use crate::options::parser::OptionsRepresentable;
 use crate::phases::phase;
-use anyhow::{Context, Result};
+use anyhow::{Context, Result, bail};
 use log::info;
 use std::collections::BTreeMap;
 use std::ops::Deref;
@@ -114,6 +114,25 @@ fn main() -> Result<()> {
         autoconfigure::autoconfigure(&mut config).context("unable to autoconfigure")?;
     }
 
+    // Unload the context so that it can be modified.
+    let Some(mut context) = context.unload() else {
+        bail!("context safety violation while trying to unload context");
+    };
+
+    // Perform root context modification in a block to release the modification when complete.
+    {
+        // Modify the root context to include the autoconfigured actions.
+        let Some(root) = context.root_mut() else {
+            bail!("context safety violation while trying to modify root context");
+        };
+
+        // Extend the root context with the autoconfigured actions.
+        root.actions_mut().extend(config.actions);
+    }
+
+    // Refreeze the context to ensure that further operations can share the context.
+    let context = context.freeze();
+
     // Run all the extractors declared in the configuration.
     let mut extracted = BTreeMap::new();
     for (name, extractor) in &config.extractors {

src/phases.rs

@@ -7,7 +7,7 @@ use std::rc::Rc;
 
 /// Configures the various phases of the boot process.
 /// This allows hooking various phases to run actions.
-#[derive(Serialize, Deserialize, Default, Clone)]
+#[derive(Serialize, Deserialize, Debug, Default, Clone)]
 pub struct PhasesConfiguration {
     /// The early phase is run before drivers are loaded.
     #[serde(default)]
@@ -23,7 +23,7 @@ pub struct PhasesConfiguration {
 /// Configures a single phase of the boot process.
 /// There can be multiple phase configurations that are
 /// executed sequentially.
-#[derive(Serialize, Deserialize, Default, Clone)]
+#[derive(Serialize, Deserialize, Debug, Default, Clone)]
 pub struct PhaseConfiguration {
     /// The actions to run when the phase is executed.
     #[serde(default)]