An entry that is not counted in strict mode still has its tries, so it
can be bad. Strict mode adds the extended boot loader partition to the
first BLS generator only. A chainload chain that does not list an initrd
that the entry has now warns, as the kernel may not find its root
without it, and strict autoconfigure says when it can't find the
partition of Sprout.
In strict mode a one-shot entry only becomes the default, the default
entry may be one with no boot counter tries left, no menu timeout means a
hidden menu, the menu is shown again when a started image returns, and
entries that mix linux, efi and uki, entries whose file is missing, and
unified kernel images with no name are hidden. Plain EFI entries are not
counted, the XBOOTLDR partition is always read, and a devicetree that
can't be installed fails the entry.
Outside of strict mode these keep working as they did, and each one is
now logged where it applies. The initrd limit of BLS entries is 32.
A devicetree that can't be installed is skipped with a warning.
Only warn about a devicetree under Secure Boot when the entry has one,
skip the fixup if its protocol can't be opened, and reject a devicetree
whose size is smaller than its header. Announce a reboot before the
delay, advertise the multi-profile UKI feature, and treat a Type 1 entry
with a profile after the first as an extra profile that is not picked as
the fallback default. A failure to read Sprout's own partition no longer
drops the entries of the XBOOTLDR partition, and the README lists every
initrd slot and describes the reboot behaviour more exactly.
Add an xbootldr option to the BLS generator. When it is enabled, the
partition with the XBOOTLDR type on the same disk as Sprout's partition
is read as well, and its entries and unified kernel images are sorted
with the others. As their files are on that partition, every entry has
an entry-root value, which is the device of the partition or nothing for
Sprout's own, to use in a path like $entry-root\$chainload. It is off
by default, as existing actions would look for the files on the wrong
partition.
A unified kernel image can have several profiles, each started by a
.profile section and made of the sections after it on top of the base.
Every profile is an entry. The first has the id of the file, and the
others add @ and the identifier or the number of the profile, with a
title that names the profile and the profile number as the load options.
The profiles share the boot counter of the file, sort in the order they
are in the image, and a profile after the first is not picked as the
default entry when no default was asked for.
The PE reader keeps every section in order, so repeated names and the
sections that a profile removes can be told apart, and reads images with
more than 96 sections.
Add a devicetree option to the chainload action, set from the devicetree
key of a BLS entry. The file is installed as the EFI devicetree table
with the memory type that a devicetree has to be in, patched by the
fixup protocol when the firmware has one, and the table of the firmware
is put back when the image returns or fails to start. It is ignored when
Secure Boot is enabled, as it can't be verified, and the DeviceTree
loader feature is advertised.
Do not pad the boot counter digits or cap the tries done counter, as
systemd-bless-boot reads a counter with a leading zero as octal and
systemd-boot never writes one. A profile only selects a profile when it
is a number above zero, an unterminated bracket in a pattern matches
nothing, and files that start with auto- are ignored in any case and for
unified kernel images too. The saved entry is compared ignoring case, and
entry settings are only expanded for sources that are looked at.
Entries now have an id, the file name without the boot counter and with
its .conf or .efi extension in lower case, which is what systemd-boot
publishes in LoaderEntries and LoaderEntrySelected and what bootctl
expects. LoaderEntryDefault, LoaderEntryOneShot and loader.conf match by
id, ignoring case, with *, ? and [a-z], and no longer match titles or
numbers. A type 1 and a type 2 entry with the same name no longer clash.
@saved now works from LoaderEntryDefault as well, stops saving when it
is not asked for, and removes a stale saved entry. LoaderEntryPreferred
and the loader.conf preferred key select an entry that skips bad boot
counter entries. An entry with no tries left that is booted by hand is
counted too, and a read-only entry file is left alone.
Type 1 entries can name an architecture, which hides them on another
architecture, and a uki with an optional profile. Files that start with
auto- are ignored. loader.conf is read lossily, and a failed measurement
no longer stops the boot.
* feat(bls): read PE sections without loading the whole image
* feat(bls): produce entries from unified kernel images
* feat(bls): boot unified kernel images as type 2 entries
Scan the EFI/Linux directory, or the new uki-path option of the BLS
generator, for .efi files and turn each one into an entry using the
metadata in its PE sections. Autoconfigure now also detects a disk that
only has unified kernel images. An image with the id of a type 1 entry is
skipped, and boot counting works on the .efi file name.
* fix(boot): rename boot counter files in place instead of copying them
* fix(bls): skip hidden files and keep unified kernel images when the type 1 scan fails
Check file name suffixes without slicing by byte offset, drop the PE
section bytes once an image has been parsed, and only fail the generator
on a type 1 error when unified kernel images are disabled.
* feat(bls): parse and render boot counters
* feat(bls): sort entries with no boot tries left last
* feat(boot): strip boot counters from bls entry ids
* feat(boot): consume bls boot counter tries before booting
* fix(boot): never default to a bad boot counter entry while a good one exists
Generators can now declare variant axes. Every generated entry is
multiplied by each combination of choices, one per axis. A choice sets
the axis name to the choice name and inserts its own values, and the
entry name is suffixed with the choice names.
Generators can also declare exclude rules, which remove generated
entries whose values match every glob pattern in a rule. This covers
unwanted variant combinations and entries like BLS rescue kernels.
Entry matching for default-entry and the bootloader interface now
accepts `*` anywhere in the pattern instead of only at the end, so
generated entry names can be matched regardless of the kernel version
in the middle of the name.
The BLS generator gains a pin-names option (default true, the existing
behavior). Two BLS generators reading the same directory previously
produced entries with identical names; disabling pin-names prefixes
them with the generator name instead. Sprout now warns when more than
one entry has the same name.
* docs(config): note that variants suffix pinned BLS entry names
Pinned BLS entry names match the BLS entry ids, but variants still
append their choice names, so those entries need a pattern like
<id>-* to be selected.
Add linux-initrd-chain to the chainload action and initrd-chain to the
edera action. Each file in the list is read in order and concatenated
into a single initrd. The chain can't be combined with the single
initrd option on the same action.
BLS entries with multiple initrds, either as repeated initrd lines or
as multiple paths on one line, previously only loaded the last one.
Parse all of them and set them in the initrd-0 through initrd-7 slots,
which the autoconfigured BLS action now chains. Unused slots stamp to
the filesystem root and are skipped. Entries with more than 8 initrds
are skipped with a warning.
A single BLS entry that could not be read, was not valid UTF-8, or
failed to parse aborted entry generation and therefore the whole boot,
contrary to the generator's documented best-effort behavior. Log a
warning and skip the entry instead.
Autoconfigure detects BLS when either \loader\loader.conf or
\loader\entries exists, but the BLS generator required the entries
directory and failed the boot without it. This broke ESPs that only
have a loader.conf, such as UKI-only systemd-boot setups. Generate no
entries when the directory is missing.
alex
Benjamin Leggett